|
Product Description
Mixer
Mate utilizes the mixer’s Mic Processor
Insert facility to switch microphone audio on
or off. Up to four mics can be independently controlled
via the unit’s front panel pushbuttons.
An LED above each pushbutton indicates when each
mic is on. Mixer Mate’s passive audio switching
utilizes parallel-pole silver-plated contacts
to ensure noise-free audio switching and maintain
sonic integrity.
The mixer’s Monitor audio can be looped-through
Mixer Mate so that Monitor audio can be muted
when selected microphones are in use. Monitor
muting is programmed using the Mute Select switches
on the back of the unit; any microphone’s
On/Off pushbutton can be programmed to automatically
mute Monitor audio as needed.
Mixer Mate also provides a Mic Tally output to
control On The Air warning lights via a Henry
Engineering Superelay or other suitable light
control interface. The Tally output is active
when any microphone is on.
Mixer Mate requires 12 volts DC to operate. When
used in with a Henry Engineering Superelay (for
warning light control), the Superelay supplies
this voltage. If Mixer Mate is not used with a
Superelay, the included 12 volt DC power supply
is used.
Mixer Mate is 1/3 rack width and can be rack-mounted
with the optional
rack-mount shelf, or cabinet or wall mounted using
optional cabinet/wall mounting brackets.
 
|
