MicroMixer is a handy mixer to have when you need to mix 2 stereo sources together, or for mixing stereo to mono.


Product Description

MicroMixer is a 4-input, 2-output stereo mixer for line-level sources. MicroMixer is a perfect utility mixer with numerous uses: combining 2 stereo sources to a stereo output; combining up to 4 mono sources; mixing mono and stereo sources to a stereo output. Each balanced bridging input will accept a balanced or unbalanced source.

A level control for each input provides adjustment from OFF to +10dB of gain. "MicroAssign" switches permit any input signal to be routed to either the Left, Right, or both outputs. Audio inputs and outpus are on plug-in euroblock connectors.

MicroMixer is 1/3 rack width and can be mounted in an optional rack shelf, or wall mounted with optional wall/cabinet mounting brackets. MicroMixer is powered by an internal AC power supply.

Technical Specifications
Input Levels -10 to +8 dBm
Input Impedance 20K ohms bal, 10K ohms unbal
Output Level +4 dBm nominal, +26 dBm max
Output Load 600 ohms or higher per output, bal
Controls Input gain, Output assign
Gain OFF to +10 dB
Frequency Response DC to 20kHz, 0.25 dB
Distortion <.01% IM/THD
Noise >80 dB below nominal output, typ
Power Requirements 115/230VAC, 50/60Hz, 3 W
Construction Steel enclosure
Physical 5.7w X 1.7h X 6.0d, 3lbs
Mounting Table top, optional rack mount shelf, optional wall/cabinet mounting brackets
Approval City of Los Angeles Elect. Test Lab

Typical Application

 

Technical specifications subject to change without notice.


 

Henry Engineering,
PO Box 3796
Seal Beach, CA 90740
Tel: 562-493-3589

www.henryeng.com
 
RETURN TO HOMEPAGE Copyright 2009, Henry Engineering