Whenever you need to connect consumer gear to professional equipment, Matchbox-HD is the way to go! Matchbox-HD eliminates the hum, buzz, and distortion caused by mismatched levels and impedances. Matchbox-HD is ideal for devices that play and record, such as DAT recorders and computer sound cards. Don't trust your audio to inexpensive units that are powered with "wall-warts"! Superb audio performance is why we've sold over 50,000 units worldwide.


Product Description

The rack-mountable Matchbox HD is the new high performance version of the industry's most popular analog level and impedance converter. Matchbox HD offers a true 100 dB S/N ratio, with 22 dB of headroom to yield 122 dB of dynamic range. It is the very best way to interface "consumer" or semi-pro equipment with professional audio gear.

The Matchbox HD is a bi-directional unit, employing four independent amplifiers to convert stereo inputs and outputs from unbalanced -10 dBv levels to +4 dBm balanced 600 ohm lines. All four outputs can be adjusted to accommodate a wide range of operating levels.

The Matchbox HD also features a special HI GAIN mode to properly match the low-level unbalanced outputs of computer sound cards. The unit’s direct-coupled circuitry and exceptional dynamic range provide absolute sonic transparency, making Matchbox HD ideal for use with digital editors, DAT recorders, and other digital audio sources.

The Matchbox HD has an internal AC power supply. It is 1/3 rack width and can be mounted using the optional rack shelf, or wall mounted with optional wall/cabinet mounting brackets.

IHF Input/Output Levels -20 to 0 dBv
PRO Input/Output Levels 0 to +8 dBm, +26 dB max
IHF Input Impedance 10k ohms; HI GAIN 5k ohms
PRO Input Impedance 20k ohms
IHF Output Load 2k ohms or higher, unbalanced
PRO Output Load 600 ohms or higher, balanced
IHF to PRO Gain +6to +20 dB; HI GAIN add 6 dB
PRO to IHF Gain -6 to infinity (off)
Number of Channels 4: 2 IHF to PRO and 2 PRO to IHF
Frequency Response DC to 20kHz, ±0.25 dB
Distortion < .01% IM/THD
Noise -100 dB ref. +4 dBu, bal.
-95 dB ref. -10 dBv, unbal.
Power Requirements 115/230VAC, 50/60Hz, 3 W
Construction Steel enclosure
Physical 5.7”w x 1.7”h x 6.0”d 3lbs
Mounting Table top, optional rack mount shelf, optional wall/cabinet mounting brackets
Approval City of Los Angeles Elect. Test Lab
Headroom 22 dB (bal.); 30 dB (unbal.)
Dynamic Range 122 dB (bal.), 125 dB (unbal.)

Technical Specifications

 

Typical Application

 
Technical specifications subject to change without notice.
Henry Engineering,
PO Box 3796
Seal Beach, CA 90740
Tel: 562-493-3589

www.henryeng.com
 
RETURN TO HOMEPAGE Copyright 2009, Henry Engineering