 |
 |
If you need to connect a pair of consumer
CD players to a professional audio system, TwinMatch is
the ideal interface. It's perfect for devices that play,
but do not record. TwinMatch is a 4-channel unit, with
all 4 channels going from RCA-to-XLR. The same great audio
performance as Matchbox! |
|
Product Description
TwinMatch
is a dual-stereo (4-channel) level and impedance converter
that interfaces two “consumer” stereo outputs
with professional balanced equipment.
TwinMatch
is ideal for use with a pair of stereo CD players or
other "play only" sources. The unit accepts
four channels (2 stereo pairs) of -10 dBv unbalanced
audio and converts to professional "600 ohm"
balanced lines. The gain is adjustable to accommodate
either +4 or +8 dBm systems.
All
circuitry is direct-coupled and transformerless for
sonic transparency, making TwinMatch ideal for digital
sources. Unbalanced inputs are on gold-plated RCA jacks;
balanced outputs are via XLR connectors.
TwinMatch
is 1/3 rack width and can be mounted in an optional
rack shelf, or wall mounted with optional wall/cabinet
mounting brackets. TwinMatch is powered by an internal
AC power supply.
 
|
|
| Technical
Specifications |
Input
Level
|
-10
dBv nominal |
| Input
Impedance |
25K
ohms, unbal |
| Output
Level |
+4
to +8 dBm nominal, +26 dBm max |
| Output
Load |
600
ohms or higher, balanced |
| Controls |
Output
Level for each channel |
| Gain |
+6
to +20 dB, adjustable |
| Frequency
Response |
DC
to 20kHz, ±0.25 dB |
| Distortion |
<.01%
IM/THD |
| Noise |
>80
dB below nominal output, typ |
| Power
Requirements |
115/230VAC,
50/60Hz, 3 W |
| Construction |
Steel
enclosure |
| Physical
|
5.7”w
X 1.7”h X 6.0”d, 3lbs |
| Mounting
|
Table
top, optional rack mount shelf, optional wall/cabinet
mounting brackets |
| Approval |
City
of Los Angeles Elect. Test Lab |
|
|
Typical
Application
Technical
specifications subject to change without notice.
|
|
503
Key Vista Drive
Sierra Madre, CA 91024 USA
TEL (626) 355—3656
FAX (626) 355—0077
www.henryeng.com
|
|
 |
|
|
|
|
