StereoMixer is a great utility mixer that can mix up to 8 audio sources in stereo or mono.


Product Description

StereoMixer is an 8-input, 2-output stereo mixer for line level sources. It is an ideal utility mixer that can be used to combine 4 stereo or 8 monaural sources.

StereoMixer can produce either a stereo or mono output, selected by the Output Mode switch. In Stereo mode, 4 stereo sources are combined to a stereo output. In Mono mode, all 8 inputs are combined to a mono output. Each input will accept either a balanced or unbalanced source.

A level control for each input provides adjustment from OFF to +10 dB of gain. All circuitry is direct-coupled and transformerless for absolute sonic integrity. Audio inputs and outputs are via plug-in euroblock connectors.

StereoMixer is 1/3 rack width and can be mounted in an optional rack shelf, or wall-mounted with optional wall/cabinet mounting brackets. StereoMixer is powered by an internal AC power supply.

Technical Specifications
Input Level -10 to +8 dBm
Input Impedance 20K ohms bal, 10K ohms unbal
Output Level +4 dBm nominal, +26 dBm max
Output Load 600 ohms or higher per output, bal
Controls Input gain, 8x
Gain OFF to +10 dB
Frequency Response DC to 20kHz, ±0.25 dB
Distortion
<.01% IM/THD
Noise >80 dB below nominal output, typ
Power Requirements 115/230VAC, 50/60Hz, 3 W
Construction Steel enclosure
Physical 5.7”w x 1.7”h x 6.0”d, 3lbs
Mounting

Table top, optional rack shelf, optional wall/cabinet mounting brackets
Approval City of Los Angeles Elect. Test Lab



Typical Application

 

Technical specifications subject to change without notice.


 

503 Key Vista Drive
Sierra Madre, CA 91024 USA
TEL (626) 355—3656
FAX (626) 355—0077
www.henryeng.com
 
RETURN TO HOMEPAGE  © Copyright 1996-2009, Henry Engineering